1 thermal (t- and ta-line) ta35 rocker 1pole https://www.schurter.com /pg17_20 circuit breakers circuit breaker for equipment thermal, rocker actuation, 1 pole see below: approvals and compliances description - thermal circuit breaker - 1-pole - snap-in version - positively trip-free release - different rocker colours - high configurability - wide current range applications - power tools - industrial appliances - equipment for construction - cleaning equipment - commercial and household kitchen appliances weblinks pdf datasheet, html-datasheet, general product information, distributor- stock-check, detailed request for product, product news technical data rated voltage ac 240 v; 50/60 hz rated voltage dc 32 v rated current range ac 0.05 - 20 a conditional short circuit ca - pacity 0.05...20 a: 2 ka, sc (c1) @ 240 vac degree of protection from front side ip 40 acc. to iec 60529 dielectric strength 50 hz: > 2.5 kv impulse 1.2/50 s: > 4 kv insulation resistance 500 vdc > 100 m lifetime mechanical: 50'000 switching cycles ? ac: 1 x ir, cos 0.6: 30'000 switching cycles ? dc: 1 x ir, l/r = 2 - 3 ms: 50'000 switching cycles overload iec: min. 40 trips @ 6 x ir, cos 0.6 ? ul / csa: min. 50 trips @ 1.5 x ir, cos 0.75 ambient temperature -30 c to 60 c vibration resistance 0.75 mm @ 10 - 60 hz acc. to iec 60068-2-6, test tc 10 g @ 60 - 500 hz acc. to iec 60068-2-6, test tc shock resistance 30 g / 18 ms acc. to iec 60068-2-27, test ea tripping type thermal actuation type rocker weight 16.5 - 18.5 g approvals and compliances detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in details about approvals approvals the approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. approval reference type: ta35 approval logo certificates certification body description vde approvals vde vde certificate number: 40019754 ul approvals ul ul file number: e71572 cqc approvals cqc ccc certificate number: 2013010307598660
2 thermal (t- and ta-line) ta35 rocker 1pole https://www.schurter.com /pg17_20 circuit breakers product standards product standards that are referenced organization design standard description designed according to iec 60934 circuit-breakers for equipment (cbe) designed according to ul 1077 standard for supplementary protectors for use in electrical equipment designed according to csa c22.2 no. 235 supplementary protectors designed according to gb 17701 circuit-breaker for equipment application standards application standards where the product can be used organization design standard description designed for applications acc. iec/ul 60950 iec 60950-1 includes the basic requirements for the safety of information technologyequipment. compliances the product complies with following guide lines identification details initiator description ce declaration of conformity schurter ag the ce marking declares that the product complies with the applicable requirements laid down in the harmonisation of community legislation on its affixing in accordance with eu regulation 765/2008. rohs schurter ag eu directive rohs 2011/65/eu china rohs schurter ag the law sj / t 11363-2006 (china rohs) has been in force since 1 march 2007. it is similar to the eu directive rohs. reach schurter ag on 1 june 2007, regulation (ec) no 1907/2006 on the registration, evaluation, authorization and restriction of chemicals 1 (abbreviated as "reach") entered into force. dimension [mm] 21.3 36 33.8 2.3 5 44.1 1.7 7.8 7.2 34 12.5 17.5 14.5 33.5 10.6 34 9.9 14.5 2.8 x 0.4 mm 6.3 x 0.8 mm line l +0.2 0 +0.2 0 panel 1.0 ? 4.0 mm +0 . 3 diagrams 1-pole, 1 bimetal, illuminated 4 p1 1) 2) 1) line, 2) load codepos aaa = c2f, c4f, c7f, c8f, c9f 1-pole, 1 bimetal, non illuminated 4 p1 1) 2) 1) line, 2) load codepos aaa = cft, cgt
3 thermal (t- and ta-line) ta35 rocker 1pole https://www.schurter.com /pg17_20 circuit breakers the keys / codepos are listed in the key table of the basic function for selection. approval rated current rated voltage ac rated voltage dc ul 1077 0.05...20 a 240 v 32 v csa c22.2 235 0.05...20 a 240 v 32 v iec 60934 0.05...20 a 240 v 32 v gb 17701 0.05...20 a 240 v 32 v typical internal resistance rated current [a] internal resistance [ ? ] 0.05 200.000 0.1 70.000 0.5 2.750 1.0 0.720 1.5 0.340 2.0 0.187 2.5 0.115 2.8 0.089 3.0 0.059 4.0 0.059 5.0 0.044 6.0 0.028 7.0 0.0142 8.0 0.0142 10.0 0.0109 12.0 0.0086 13.0 0.0072 14.0 0.0072 15.0 0.0056 16.0 0.0056 18.0 0.0052 20.0 0.0052 effect of ambient temperature the units are calibrated for an ambient temperature of +23c. to determine the rated cur - rent for a lower or higher ambient temperature, use a correction factor (typical value) from the table below: ambient temperature [c] correction factor -30 0.77 -20 0.81 0 0.90 +23 1.00 +40 1.03 +50 1.04 +60 1.06 example: rated current = 5 a; environmental temperature = 50 c; --> correction factor = 1.04; resulting current = 5.2 a --> fount to next higher rated current: 6 a
4 thermal (t- and ta-line) ta35 rocker 1pole https://www.schurter.com /pg17_20 circuit breakers time-current-curves time in seconds t a35 <3 a (t c-1, tc-2) 1, 2 pole 3 pole 1,05 10 8 5 4 3 2 1,35 10'000 60 2`000 1`000 500 200 100 50 20 10 [ sec ] [ min ] 10 5 1 30 20 5 2 1 0,5 0,3 0,2 0,1 multiple of rated current in reference temperature +23 time in seconds >3 -2 0a (t c- 1, tc-2) (3 pole max. 12a) 1, 2, 3 pole 1,05 10 8 5 4 3 2 1,35 10'000 60 2`000 1`000 500 200 100 50 20 10 [ sec ] [ min ] 10 5 1 30 20 5 2 1 0,5 0,3 0,2 0,1 ta 35 multiple of rated current in reference temperature +23 config. code ta35 | - | cbd | b | f | 120 | c0 | - | czmxx | the characters are placeholders for the correspondingly keys of selections from the key tables. ta35 | - | cbd | b | f | 120 | c0 | - | czmxx | = basic function basic function configuration key 1-pole, 1 bimetal, illuminated 240 v c2f 1-pole, 1 bimetal, illuminated 120 v c4f 1-pole, 1 bimetal, illuminated 24 v c7f 1-pole, 1 bimetal, illuminated 12 v c8f 1-pole, 1 bimetal, illuminated 5 v c9f 1-pole, 1 bimetal, without illumination cft 1-pole, 1 bimetal, momentary switch, without illumination cgt ta35 | - | cbd | b | f | 120 | c0 | - | czmxx | = rocker colour rocker colour configuration key clear transparent 1 red transparent 3 green transparent 4 orange transparent 6 blue transparent 7 black b green g red r white w orange x yellow y ta35 | - | cbd | b | f | 120 | c0 | - | czmxx | = legend legend configuration key embossed i 0 f white printed on off h black printed on off k white printed i 0 l black printed i 0 m ta35 | - | cbd | b | f | 120 | c0 | - | czmxx | = rated current rated current configuration key without thermal overload protection / temporarily without vde approval c00 0.05 a z05 0.1 a j01 0.2 a j02 0.3 a j03 0.4 a j04 other rated currents on request
5 thermal (t- and ta-line) ta35 rocker 1pole https://www.schurter.com /pg17_20 circuit breakers rated current configuration key 0.5 a j05 0.8 a j08 1.0 a j10 1.2 a j12 1.5 a j15 2.0 a j20 2.5 a j25 3.0 a 030 3.5 a 035 4.0 a 040 5.0 a 050 6.0 a 060 7.0 a 070 8.0 a 080 10.0 a 100 12.0 a 120 13.0 a 130 14.0 a 140 other rated currents on request rated current configuration key 15.0 a 150 16.0 a 160 18.0 a 180 20.0 a 200 other rated currents on request ta35 | - | cbd | b | f | 120 | c0 | - | czmxx | = reserve reserve configuration key reserve c0 ta35 | - | cbd | b | f | 120 | c0 | - | czmxx | = accessories factory mounted accessories configuration key without cover for subsequent fitting accessories see: http://www.schurter.com/pdf/english/typ_ta35_accessories.pdf all variants basic function rocker colour legend rated current accessories config. code order number 1-pole, 1 bimetal, without illumination white black printed 2.0 a without cover ta35-cftwkj20c0 4435.0029 1-pole, 1 bimetal, without illumination white embossed 3.0 a without cover ta35-cftwf030c0 4435.0019 1-pole, 1 bimetal, without illumination white black printed 3.0 a without cover ta35-cftwm030c0 4435.0082 1-pole, 1 bimetal, illuminated 120 v red transparent white printed 3.0 a without cover ta35-c4f3h030c0 4435.0431 1-pole, 1 bimetal, without illumination red black printed 3.0 a without cover ta35-cftrm030c0 4435.0481 1-pole, 1 bimetal, without illumination black embossed 4.0 a without cover ta35-cftbf040c0 4435.0028 1-pole, 1 bimetal, without illumination black embossed 5.0 a without cover ta35-cftbf050c0 4435.0173 1-pole, 1 bimetal, without illumination black white printed 5.0 a without cover ta35-cftbh050c0 4435.0204 1-pole, 1 bimetal, without illumination black white printed 6.0 a without cover ta35-cftbh060c0 4435.0205 1-pole, 1 bimetal, without illumination red embossed 10.0 a without cover ta35-cftrf100c0 4435.0056 1-pole, 1 bimetal, without illumination black embossed 10.0 a without cover ta35-cftbf100c0 4435.0174 1-pole, 1 bimetal, momentary switch, without illumination black embossed 10.0 a without cover ta35-cgtbf100c0 4435.0471 1-pole, 1 bimetal, without illumination white embossed 13.0 a without cover ta35-cftwf130c0 4435.0049 1-pole, 1 bimetal, without illumination white embossed 15.0 a without cover ta35-cftwf150c0 4435.0037 1-pole, 1 bimetal, without illumination black embossed 15.0 a without cover ta35-cftbf150c0 4435.0137 1-pole, 1 bimetal, without illumination black white printed 16.0 a without cover ta35-cftbh160c0 4435.0209 1-pole, 1 bimetal, without illumination black embossed 16.0 a without cover ta35-cftbf160c0 4435.0300 1-pole, 1 bimetal, without illumination black white printed 20.0 a without cover ta35-cftbl200c0 4435.0256 most popular. availability for all products can be searched real-time: https://www.schurter.com/en/stock-check/stock-check-schurter packaging unit 20 pcs
6 thermal (t- and ta-line) ta35 rocker 1pole https://www.schurter.com /pg17_20 circuit breakers accessories description ta35 accessories screw-on collar with cover, ip65 the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments. information furnished is believed to be accurate and reliable. however, users should independently evaluate the suitability and test each product selected for their own applications. 19.01.2018
|
